Leading 10 common forklift accidents ， forklift operation should pay attention to these issues ！.

Don't underestimate the forklift at the workplace. If the operation is bad, there will be major accidents in minutes, and there are many crashes entailing forklifts.

Instance 1: The forklift freight obstructed the chauffeur's view, and the person ahead can not be found, leading to a moving crash.
Situation 2: In order to preserve the balance of the forklift when raising hefty items, the workers used their body weight as the weight, which nearly created casualties.
Situation 3: The size of the forklift cargo surpasses the permitted size of the course and holds on the roadside rack, which practically triggers an mishap.
Situation 4: Forklift is speeding and rolls over during a turn.
Situation 5: The forklift driver did not observe the pedestrian, and the pedestrian did not observe the forklift.
Instance 6: The forklift raises the personnel illegally, the forklift chauffeur does not use the safety belt, the forklift lifter drops and the chauffeur is squashed when the forklift surrender.
Instance 7: The forklift vehicle driver did not put on a safety belt and fell from the automobile when it rolled over and was squashed.
Forklift procedure need to take notice of these matters ：.

Start.
1. Before beginning, observe the environments, and after verifying that there are no obstacles that prevent the security of driving, honk the horn first and afterwards begin.
2. For cars with hydraulic ( atmospheric pressure) brakes, the brake hydraulic pressure (air pressure) scale should be safe before starting.
3. When the forklift begins with a tons, the vehicle driver ought to initially verify that the load is steady and trustworthy.
4. The beginning needs to be sluggish and consistent.

Driving.
1. When driving, the height in between the bottom end of the fork and the ground must be kept at 300mm-400mm, and the pole ought to be slanted backward. .
2. Do not raise the fork too expensive when driving. When going into and leaving the task website or while driving, be careful that there will be no obstacles in the sky. When the tons is traveling, the fork has to not be elevated too high, which will affect the stability of the forklift. .
3. After dumping, the fork must be reduced to the normal driving setting prior to driving. .
4. When transforming, if there are pedestrians or automobiles close by, the driving signal needs to be provided first. High-speed sharp turns are prohibited. High-speed doglegs will create the automobile to lose lateral security and topple. .
5. When the forklift is downhill, it is purely forbidden to turn off the flame and slide, and it is forbidden to brake all of a sudden while driving with tons unless there are unique scenarios.
6. When the forklift is running, it must comply with the website traffic rules in the factory and must maintain a certain safety range from the lorry in front. .
7. When the forklift is running, the load must be in the most affordable placement that does not hinder the driving, and the gantry must be properly tilted back. The load shall not be increased except when stacking or loading. .
8. The height of the load must not block the driver's view. In unique conditions, when the thing influences the forward vision, drive at a reduced speed when reversing.
9. It is forbidden to switch on the ramp, nor to drive throughout the ramp. .
10. The secure driving rate of the forklift in the factory area is 5 km/h, and it has to drive safely at a reduced speed when getting in the production workshop area. .
11. When the forklift is lifted, raised or driven, it is prohibited for workers to depend on the fork to hold products and play a stabilizing duty. .
12. If troubles are discovered, they will certainly be repaired and reported in a timely way, and they will never ever operate with health problems or hide them.

filling and unloading.
1. When fork-loading items, the range in between both forks must be changed as needed to make the lots of the two forks well balanced and not manipulated, and one side of the item need to be against the rack. .
2. It is restricted to deal with a solitary fork or utilize a fork top or pull. In unique situations, safety and security indication must be established Stand-on Electric Pallet Stacker to remind bordering pedestrians. .
3. In the process of loading and dumping products, the forklift has to be braked with the brake. .
4. The rate of the car need to be sluggish and stable. Be careful not to roll the wheels on the dunnage, so as not to stretch the rolled things and harm individuals. .
5. When using a fork to fork the goods, the fork must be as deep as feasible under the load, and it should Electric Forklift Truck for Warehouse be kept in mind that the fork tip ought to not touch various other items or objects. The tons must be supported with minimal back tilt of the gantry to ensure that the load does not slide in reverse. The mast can be slanted ahead somewhat when the lots is lowered to allow for very easy positioning of the tons and removal of the forks. .
6. It is prohibited to fork products at high speed and ram tough things with the fork head. .
7. When the forklift is working, it is restricted for people to loaf the fork, so regarding avoid the collapse of the goods and injure individuals. .
8. Straining is banned, and it is prohibited to use forks to lift personnel to participate in high-altitude operations to avoid high-altitude dropping accidents. .
9. It is not enabled to use the brake inertia to slip, put, round or roll things. .
10. It is not permitted to use forks to choose, transform pallet unload.

Leaving .
1. It is restricted to leave the forklift when the products on the fork are in the air. Prior to leaving the forklift, you should dump the goods or lower the fork structure.
2. Pull the emergency brake take care of to dead or dispirit the hand brake switch.
3. The engine is turned off and the power is cut off. (Except for special situations, such as the vehicle driver does not leave the lorry's line of sight and does not surpass 1 min).
4. Get rid of the trick. .

Forklift Operation Precautions.
1. Before and after the forklift procedure, the look should be examined, and fuel, lubricating oil and air conditioning water ought to be added.
2. Examine the security performance of starting, running and stopping.
3. Inspect whether the lights and horn signals are total and effective.
4. During the operation of the forklift, inspect whether the stress and temperature are normal.
5. After the forklift is running, the external leak must likewise be checked and the seals need to be replaced in time.

Forklift Safety Operation Specifications.
1. You should examine before leaving the car;.
2. When you come across a person in front of you throughout driving, you must send a signal at a distance of 5 m;.
3. The driving rate in the factory does not exceed 5 km/h;.
4. When driving, the nadir of the cargo need to be 0.3 m ~ 0.4 m above the ground;.
5. The transforming should not be also sharp to stop the tendency of " cost-free switching";.
6. Adding and down the slope must be sluggish and consistent, and no turning on the incline is permitted.
7. Do not drive across the gradient. When the gradient is above 10%, the lorry ought to be driven backwards when declining;.
8. When the forklift employees bring the goods and move forward, if they come across huge or hefty products and most likely to the vehicle driver's line of sight, they need to take the turning around workout
.
The "Eight Prohibitions" must be complied with in the operation.
1. Solitary fork operation is not enabled.
2. It is not enabled to raise the goods for far away driving.
3. It is not permitted to grab the goods by handing over the pallet with the fork.
4. It is not permitted to straight shovel chemicals, flammables and other harmful chemicals with forks.
5. It is not permitted to utilize inertia pressure to get the goods.
6. It is not permitted to use stopping pressure to exile round or easy-to-roll items.
7. It is not enabled to bring people to work on the pallet or fork, and it is purely restricted to stand under the fork after the fork is elevated.
8. Do not drive laterally on inclines
.
Car park is not allowed under the list below problems.
1. Contours, narrow roads, train crossings;.
2. Sections with a longitudinal incline above 5%.
3. When there is an challenge on one side of the roadway, the contrary side of the section with the very same size as the challenge must be within 20 meters at each end.

Web：https://www.onenforklifts.com/
Email：[email protected]
Phone：+86 13827083844